-40%
LCD Inverter Board 2 Lamp CCFL Backlight Driver US
$ 6.06
- Description
- Size Guide
Description
FeaturesHigh performance, low consumption.
Open lamp protection
Wide Dimming Range
Lamp Current Balance Control
Input current overload protected ( fuse protect )
Application
The DC to AC back-light inverter is special designed on any type LCD display in
implement (i.e. LCD monitor, notebook、laptop computers etc.)
Suitable load
17〞or smaller 2 Lamps TFT LCD Module
Environmental Condition
Operating temperature :-5℃ -- 50℃
Storage temperature : -20℃-- 70℃
Operating humidity : 10% -- 95%RH
Storage humidity : 10% -- 95%RH
The DC to DC back-light inverter suggested working in the condition of upon. It can
be work 500thousand hours at least in the below condition.
Operating temperature :-20——70℃
Operating humidity :10%——95%RH
NOTES:
Current of the lamp must use a high frequency current meter,There have a four
amperes fuse in the inverter
Do not attach a conducting tape to lamp connecting wire, if the lamp wire attach to
conductive tape, TFT-LCD module have a low luminance and the inverter has
abnormal action because leakage current occurs between lamp wire and conducting
tape. If the display arrangement is less friendly such as the asymmetrical wiring
forces unequal losses and the lamps receive imbalanced current. Even with identical
lamps, illumination may not be balance.
For Safety Issue, please keep 4.0mm at least from the metal parts of the system to
the inverter. Or put a suitable insulator between the inverter and the metal parts to
avoid the situation of breakdown or arcing etc .
Don’t twist , deform , drop or knock the inverter during assembly.
Guarantee to offer ESD shield bag to protect the product from electrostatic or
magnetic interference during delivery. Due to the inverter is usually designed without
the enclosure. please take care about ESD at anytime .
The products are not intended for use in systems in which failures of product could
result in personal injury.
Package Includes:
CCFL Inverter Board x1