-40%
J5-410/45 [5-Shot .410/.44/.45] Speedloader, Block, Stand, Wall Mount, or Pouch
$ 31.66
- Description
- Size Guide
Description
J5-410 & J5-44/45 Speed Loaders and Accessories,use drop-down menus to select configuration; gun, ammo, and belt not included.
Sorry, we are currently out of these speedloaders, only a couple of the empty blocks are available.
It may be months before more of the speedloaders are available.
✔
NEW
✔
Low Price
✔
U.S Shipping
✔
Authorized Dealer
Made in the U.S.A.
The
J5-410 speedloader
(upper left of main image) is CNC Machined for the following 5-shot .410 caliber revolvers
:
Taurus
Judge (.410 shotshell)
The
J5-44/45 competition speedloader
(upper middle of main image) is CNC Machined for the following 5-shot .44/.45 caliber revolvers
:
Taurus
Judge (.45 LC only)
Taurus
M450 & M44 Tracker
Charter Arms
.44 Bulldog
Smith & Wesson
.44 Night Guard
Rossi
R44102
The
Speed Loader
s
(upper left and middle of image)
- Available Singly, in Pairs, a Mix, or in combination with a Block or Pouch.
- Machined from solid billet aluminum,
- Utilize internal O-rings which reduce the need for lubrication,
- Available Natural Bare Metal or Anodized Pink, Tactical Black or Zombie Green.
The
Bedside Block
(upper right corner of image)
- Holds
Two
Full Reloads, and is available By Itself, or with 1 or 2 Speedloaders.
- Machined from a 4 inch by 2 inch piece of aircraft aluminum that is 3/4 inch thick.
- Available Natural Bare Metal or Anodized Pink, Tactical Black or Zombie Green.
The
Range Block
(middle row left side of image)
- Holds
Eight
Full Reloads, and is available By Itself, or with 1 or 2 Speedloaders.
- Machined from a 7 inch by 3.5 inch piece of aircraft aluminum that is 3/4 inch thick,
- Only comes in the Bare Natural Finish, and will not be anodized.
The
Range Stand
(middle of image)
- Holds
Four
Full Reloads, and is available By Itself, or with 1 or 2 Speedloaders.
- 1/4" stainless steel rod in the optimal angle to hold your firearm.
- Machined from a 7 inch by 3.5 inch piece of aircraft aluminum that is 3/4 inch thick,
- Only comes in the Bare Natural Finish, and will not be anodized.
The
Cylinder
Range Block
(middle row right side of image)
- Holds
Five
Full Reloads, and is available By Itself, or with 1 or 2 Speedloaders.
- Machined from a piece of 4 inch aircraft aluminum that is 3/4 inch thick,
- Only comes in the Bare Natural Finish, and will not be anodized.
The
Wall Mount
(lower left corner of image)
- Holds
Two
Loaded Speedloaders, and is available By Itself, or with 1 or 2 Speedloaders.
- Use drywall screws to mount in a closet or for other applications such as a desk, simply use a size 8 screw with a nut to match (screws and nuts not included).
- Only comes anodized in the Tactical Black finish.
The
Dupot Hytrel Double
Pouch
(bottom row middle of image)
- Holds
Two
Loaded .44/.45 Speedloaders, and is available with 2 Speedloaders.
- Will not work with loaded .410 speedloaders.
- Fits 2¼" or smaller belt (not included).
- Nickel snaps closure.
- Available in Basket-Weave Finish (shown) or Plain Finish (not shown).
- Only available in Black color.
- Manufactured by HKS.
The
Premium Wilderness Tactical Single
Pouch
(lower right corner of image)
- Holds
One
Loaded Speedloader, and is available with 1 Speedloader.
- Highly adaptable design.
- Works with either .410 or .44/.45 speedloader.
- Extra heavy duty Nylon webbing with Velcro closure.
- Die-cut sides improve grasp on large X-Frame speedloaders.
- Signature wraparound belt loop design.
- Only available in Black color.
- Manufactured by Wilderness Tactical.
Notes
: If your revolver is not listed, the speedloader may not fit--check with the gun manufacturer. If the cylinder dimensions are the same as a listed revolver, then they might use the same speedloader. Whether your gun is
listed or not
, with the cylinder fully open there must be a straight path for all rounds to load simultaneously, plus a small allowance for the thickness of the side of the speedloader. If your revolver's grip or cylinder release is in the way of the speedloader, the grip or cylinder release may need to be replaced or modified. Make sure the round count of your cylinder matches that of the speedloader. Listed above is the extent of what has been tested by the manufacturer or reported by other customers as working--if your gun is not listed we have no further information.
Directions for use of blocks with speedloaders:
Fill the block with the ammo of your choice
Turn post of speed loader Counter-clockwise releasing the key
Place speed loader over the rounds
Turn post clockwise to lock on the rim of the casing
Place rounds into the firearm cylinder
Turn post counter-clockwise to release rounds into your cylinder
NOTE: Images shown demonstrate possible combinations, may not be actual configuration nor quantities ordered, see description and options for what you are ordering. Use drop-down menus to select configuration--available with or without speedloaders and with or without the block or pouch. Belt not included with any of the Pouches.
NOTE: UPS and FedEx will not be used for deliveries to PO Boxes, APO/FPO/DPO, and the US Protectorates--orders placed as such will either be canceled or shipped via the Postal System at our discretion.