5X-500 [5-Shot .500 S&W] Speedloader, Block, or Pouch - for S&W 500, Taurus .50

Description

5X-500 Speed Loaders and Accessories,
use drop-down menus to select configuration, ammo not included.
Made in the U.S.A.
The 5X-500 Speed Loaders and Blocks are CNC machined to fit the following 5-Shot .500 S&W revolvers
:
S&W
- 500
Taurus
- .50 Cal.
The
Speed Loader
(upper left corner of image)
- Available Singly, in Pairs, or in combination with a Block or Pouch.
- Machined from solid billet aluminum,
- Utilize internal O-rings which reduce the need for lubrication,
- Available Natural Bare Metal or Anodized
Pink
,
Tactical Black
or
Z
o
mb
i
e Gr
e
en
.
The
Bedside Block
(upper right corner of image)
- Holds
Two
Full Reloads, and is available
By Itself with Zero speedloaders
, or with 1 or 2 Speedloaders.
- Machined from a 4 inch by 2 inch piece of aircraft aluminum that is 3/4 inch thick.
- Available Natural Bare Metal or
Anodized
Pink
,
Tactical Black
or
Z
o
mb
i
e Gr
e
en
.
The
Cylinder Range Block
(lower left corner of image)
- Holds
Five
Full Reloads, and is available
By Itself with Zero speedloaders
, or with 1 or 2 Speedloaders.
- Machined from a 6 inch diameter piece of aircraft aluminum that is 1 inch thick,
- Only comes in the Bare Natural Finish, and will not be anodized.
The
Tactical Pouch
(lower right corner of image)
- Holds
One
Loaded Speedloader, and is available By Itself with Zero speedloaders or with 1 Speedloader.
- Fully Adjustable,
- 100% double-stitched Nylon Webbing Construction,
- Die-cut sides improve grasp on larger loaders,
- No more removing your belt with a wraparound belt loop,
- Only available in Black.
Notes
: If your revolver is not listed, the speedloader may not fit--check with the gun manufacturer. If the cylinder dimensions are the same as a listed revolver, then they might use the same speedloader. Whether your gun is
listed or not
, with the cylinder fully open there must be a straight path for all rounds to load simultaneously, plus a small allowance for the thickness of the side of the speedloader. If your revolver's grip or cylinder release is in the way of the speedloader, the grip or cylinder release may need to be replaced or modified. Make sure the round count of your cylinder matches that of the speedloader. Listed above is the extent of what has been tested by the manufacturer or reported by other customers as working--if your gun is not listed we have no further information.
Directions for use:
Fill the block with the ammo of your choice
Turn post of speed loader Counter-clockwise releasing the key
Place speed loader over the rounds
Turn post clockwise to lock on the rim of the casing
Place rounds into the firearm cylinder
Turn post counter-clockwise to release rounds into your cylinder
NOTE:  Stock images shown demonstrate possible combinations, may not be actual configuration nor quantities ordered, see description and options for what you are ordering.  Use drop-down menus to select configuration--available with or without speedloaders and with or without the block or pouch.  If you select Zero speedloaders, you will not receive any speedloaders.
NOTE: UPS and FedEx will not be used for deliveries to PO Boxes, APO/FPO/DPO, and the US Protectorates--orders placed as such will either be canceled or shipped via the Postal System at our discretion.